Jaltest's User-Friendly Interface

Hyster-Yale Materials Handling Corporation is an American company that produces a range of forklifts and other materials handling equipment (MHE). Its first forklift truck rolled off the assembly line in the 1920s under the name of Yale & Towne Manufacturing.

The company today designs, manufacturers, sells, and services a wide range of lift trucks powered by diesel, electric, and LPG engines. This variety is what has made Yale a name to reckon with globally in the material handling equipment niche.

If you are an owner of Yale equipment, you should have the Jaltest diagnostic software to identify and resolve any minor issue before it becomes a major problem. Our Yale fault code list is a very handy maintenance tool to keep your equipment on the job without downtime and upsetting your operational schedule.

The Jaltest Yale forklift fault code list is among the best in this niche as it offers deep coverage of the entire range of products of Yale. Among the models covered by our Yale fork truck fault codes are GDP 50VX, ERP030-40VT, and more. From simple procedures to complex ones such as force regens, live data monitoring, and full system scans, the Jaltest software has you covered with problem identifications and resolutions that are no less than dealer-level services.

The Yale lift truck fault codes from Jaltest has a user-friendly menu that walks you through any operational issue and offers quick resolutions corresponding to the code. You get a whole lot of technical information of the equipment on the laptop screen and hence vault rectification can be carried out effortlessly.

Contact us to know about Yale material handling equipment diagnostic tools.

The Functions of The Yale Fault Code

When you use the Jaltest maintenance tool, you can perform problem-solving functions for all components of any Yale material handling equipment. You get easy-to-understand technical information and wiring diagrams and access the service password menu to set passwords.

The main benefit of our Yale fault code is that you can carry out fault code clearance regardless of whether the equipment is propelled by diesel, electric, or LPG engines. You get optimized results when you troubleshoot by symptoms from the diagnostic menu. The software takes you through several steps to accurately pinpoint the issue with the forklift.

Among the critical steps that you will be guided through are checking the injector and the wiring connections, the Electronic Control Unit, and finally be helped to clear the Yale forklift fault code list to verify problem has been resolved. These advanced solutions will quickly bring your Yale forklift trucks back to business again.  

The USP of the Jaltest Yale fault code list that makes it a notch above others in the field is the detailed technical and system information provided in the diagnostic menu. Once you access the software, you get detailed technical data for full system scans, maintenance resets, and special functions (shortcuts).

After you reach this stage of maintenance, you will be offered comprehensive solutions that cover the central computer, hydraulic systems, electronic modules, power modules, instrument clusters, and more.

Additionally, you can connect and diagnose issues with Cummings, Yanmar, and other major engine brands that power Yale forklifts so that you get the most out of your material handling equipment of this brand.  

Advanced Maintenance Tool and Yale Forklift Fault Code List

With the Jaltest advanced diagnostic software for Yale material handling, you can clear fault codes regardless of the model and propulsion mode. Hence, the software is equally useful for checking the Yale electric forklift fault code list or for diesel or LPG-driven equipment. Troubleshoot symptoms and carry out a quick diagnosis of any issue.

You will be helped along by detailed diagrams so that you are never at a loss regarding problem resolutions. Critical systems include the engine management control unit, multifunctional levers, reverse drive lever, and more. You can do away with the manuals and get dealer-level solutions for any problems from engines, to hydraulics to transmissions, and more.

How To Clear Yale Forklift Fault Code List

While the Yale fault code list will show up on some older generations of the Yale forklift, all new models of forklifts show the fault code of the equipment on the dashboard. These codes are not standardized and differ from model to model. So, how do you access the system to clear any Yale fault code?

For accessing the system, you need the password that has been provided by the company. This is often changed by the dealer before shipping. Alternately, you can go to the Jaltest diagnostic software menu to set the password.

After accessing the system, you can see the fault code, how many times it has occurred, and when. Once you know the precise fault code, you can check with the Jaltest Yale fault code list to know the precise nature of the issue.

To come to this stage, you must connect the Jaltest diagnostic software laptop to your Yale equipment and the fault code will show up on the screen. You can then go through with the resolutions as given in the Jaltest maintenance tool.

While going through the Yale fault code list, you will come up against two possibilities.

The first is called the pending fault code list that is stored in the onboard computer of the Yale material handling equipment. It indicates that there is a probable issue but that has not been confirmed through repeat occurrences. This fault code must be monitored to check if this problem persists.

If you find that this issue continues over several driving cycles, it should be moved from the pending fault code list to the permanent fault code list for further action and rectification. The benefit of identifying a pending fault code is that it can be quickly resolved before it becomes a major problem.  

The second possibility is the permanent Yale lift truck fault codes where the diagnostic trouble code (DTC) is stored in the onboard computer. When the Jaltest maintenance tool finds such a problem, it must be fixed before it can be cleared from the Yale fault code list.

Whether the issue is resolved must be checked over several driving cycles. Resolving permanent fault codes is critical as it consistently hampers optimized performance of your Yale material handling equipment.

Read more about problem-solving in Yale material handling equipment.

Yale Fork Truck Fault Codes – A Sample

To understand the concept of the Yale fault code list, given below are some examples of the Yale fault code that might pop up on your diagnostic software screen when you connect it to the onboard computer of the Yale equipment.

524223-0: XMSN Reverse pressure is greater than commanded pressure.

524225-0: XMSN Forward pressure is greater than the commanded pressure.

524223-1: XMSN Reverse pressure is less than commanded

524225-1: XMSN Forward pressure is less than commanded.

105-3: Intake Air Temperature Sensor OORH

110-3: Coolant Temperature Sensor OORH

177-3: Transmission Oil Temperature Sensor OORH

522603-3: Fuel Temperature (LPG) Sensor OORH

105-4: Intake Air Temperature Sensor OORL

Once you get the fault code along with a description of what is wrong with the equipment, you can initiate corrective measures to get it back on the job.

For example, let us take the Yale fault code 3701-0. It is an indication that there is soot buildup in the diesel particulate filter of your Yale equipment and that it must be cleaned to prevent the forklift from going into limp mode.

The Jaltest software can measure the extent of soot in the DPF and provide solutions like high, very high, or normal levels of servicing called force regens. Once the force regen is completed, a status report on the DPF and the regeneration of the SCR Catalytic Converter is submitted by the Jaltest Yale maintenance tool.

Summing Up

For owners of Yale material handling equipment (MHE) such as forklifts, lift trucks, and Yale pallet jacks, the Jaltest diagnostic tool is essential to keep the equipment on the job without facing any downtime. The fault code will guide you through any issue with your equipment regardless of whether it is Yale pallet jack fault codes, Yale electric forklift fault codes, or any other.

Our software provides cutting-edge solutions so that your equipment is not affected by any minor or major issue for long. What makes the software especially user-friendly is the ease with which it can be set up on your laptop. There is no elaborate configuration process unlike others in this niche, simply plug in and the software is ready to go.

Finally, we offer three updates to the software every year since we understand that Yale implements technological innovations to their forklifts regularly. Through the updates, you will be abreast of the changes and the Jaltest software will never become obsolete.

Before going into Case IH fault codes and lookup, a brief overview of the Case IH company and its products is needed. It will help to understand their fault codes and what it takes to resolve any issue before it becomes a major problem leading to downtime.

Case IH is an American manufacturer of agricultural machinery. The company was created in 1985 when Tenneco acquired specific assets from the agricultural division of International Harvester and merged it into its J.I. Case Company. Currently, Case IH is owned by the American-Italian corporation CNH Industrial.

Broadly speaking, Case IH offers a range of services across its nationwide network of dealers and distributors. These include agricultural equipment, the backbone of the company along with parts and service support for farmers and commercial operators. Among the products of Case IH are combines and harvesters, tractors, hay and forage equipment, planting and seeding systems, and sprayers and applicators.

In short, Case IH is a one-stop shop for the complete range of equipment needed for agriculture and farming. Because of the high quality of their equipment, Case IH has won numerous AE50 awards from the American Society of Agricultural and Biological Engineers.  

This post will go into the several aspects of Case IH fault codes and how they help to diagnose any issues with your equipment at an early stage before they become full-blown problems.

Upkeep of Your Case IH Equipment With Jaltest Case IH Fault Codes Lookup

The Jaltest Case IH fault code list provides dealer-level servicing and resolution of all issues connected with all components of Case IH agricultural equipment. The scope of the software includes engines, hydraulics, transmissions, central computers, and more. All functions can be effortlessly performed by our Jaltest Case IH maintenance tool, even complex procedures like force regens, calibrations, and setting parameters.

Further, what makes our software especially appealing for owners of Case IH agricultural equipment is that it caters to a wide range of models, from leading top-of-the-line ones to the more common types. The Case IH fault codes list is good for Case IH series such as Steiger, Magnum, Maxxum, and the Puma models. Among the Case tractors that are covered by our software are Steiger 620 and Magnum 420 and for combines it is Case IH Axial Flow 9250 and 7150.

Among the cutting-edge diagnoses that you get with the Case IH maintenance tool are Case IH engine fault codes, Case IH combine fault codes, Case IH tractor fault codes, Case Puma fault codes, and more. You have the option of carrying out full system scans periodically to ensure that your equipment is working at peak performance efficiency, ruling out the possibility of downtime. This is very important during the harvesting season when all your equipment will be working round the clock.

Conversely, by checking Case IH fault codes, you can troubleshoot specific symptoms whenever they crop up. Any problem with your Case IH equipment will be immediately identified and rectification procedures initiated at the earliest at a level comparable with dealer servicing.

Among the system checks that can be performed by the Jaltest software are cylinders test, high-pressure test, engine brake, Variable Geometry Turbocharger (VGT), throttle valve electric actuator for the exhaust engine brake, and more. This level of deep coverage with the Case IH fault code lookup keeps your Case IH agricultural equipment always on the job.

Contact us to know more about the Case IH diagnostic software.

Deep Coverage Of Case IH Equipment With The Case IH Fault Code Lookup

With the Case IH fault code lookup, you get access to a very user-friendly and intuitive menu that allows you to evaluate the functioning of all major systems of your Case IH agricultural equipment. When you enter the diagnostic menu, you get detailed technical and system information along with corresponding wiring diagrams, maintenance and vehicle data, and releases and procedures.  

After you access the Case IH fault codes, you can either select all the parameters or go by specific metrics as per the fault code being displayed. For example, particular fault code clearance may be related to the central computer, electronic module, climate HVAC, hydraulic system, engine, instrument cluster, power take-off, powertrain, and more.

This enables you to undertake procedures such as force regens, calibrating transmissions and hitches, code injections, and verification of the SCR system, that bring your equipment back to working condition.  

Case IH Engine Fault Codes Identifications

The Jaltest Case IH engine fault codes help to resolve any issue with the engines of your Case IH agricultural equipment.

One of the most critical activities that can be carried out in this regard is forced regens. This becomes necessary when there is soot buildup in the particulate filter in the diesel engine, thereby pushing it to go into limp mode. Further, our Jaltest diagnostic tool will also prompt you to take the necessary action, ranging from High to Very High depending on the extent of soot build up in the DPF.

Forced regens as a part of Case IH engine fault codes resolution is good on all models of Case IH agricultural equipment. These include the Case Steiger, Case Magnum 420, Case IH axial flow 9250/7150, Case Puma forced regens, and more. Trust our maintenance software to always be up to it. Our technologically advanced diagnostic software is always up to it.

We will now come to a few examples to offer a better understanding of Case IH engine fault codes. However, these are not standardized and the codes differ from model to model. Here, the focus will be on the Case IH tractor fault codes for the engine of the MX Magnum tractor.

111: Engine controller failure – Hardware failure

123: Boost pressure sensor voltage is too low

151: The coolant temperature limit has exceeded the warning limit

191: ATC clutch driver shorted to ground when ON

241: Vehicle speed signal lost

274: Rear pumping control valve current is high

295: Ambient air pressure data invalid

329: CAPS Pump has an over-pumping failure

419: Boost pressure data invalid

486: Rear fueling actuator under-fueling

There are hundreds of Case IH tractor fault codes for the Magnum range of Case IH tractors. The examples given here are just an indication of how Case IH engine fault codes help to take care of every minor and major engine malfunction so that you can take quick action to keep your equipment in peak performance mode.

Read more to know about the Case IH Diagnostic Software. 

Types of Case IH Fault Codes

We have so far gone through the Case IH fault code lookup and how the Jaltest software resolves issues to keep your agricultural equipment working in top condition. We will now go into the types of Case IH fault codes.

Pending Fault Codes

A pending fault code is an advanced warning that is stored in the onboard computer of the Case IH agricultural equipment. It is an indication that there is a potential issue but that is yet to be confirmed through repeat occurrences. Pending Case IH fault codes are set at the first instance of a detected fault that is then monitored to identify recurring problems. If the issue persists over time during several driving cycles, the pending code will now be taken to be a confirmed or a permanent part of the Case IH fault code list. The benefit of the pending fault code is that it is an early indication of a larger problem and can be resolved to prevent any major issue in the future that will lead to downtime.

Permanent Fault Code

A permanent Case IH fault code is a diagnostic trouble code (DTC) that is stored in the onboard computer system of the Case IH agricultural equipment. It is symptomatic of a confirmed issue and cannot be set right by simply disconnecting the battery. When our maintenance tool identifies such a problem through the Case IH fault code lookup, the code must be cleared by fixing it. This is verified through multiple driving cycles to check that the issue does not crop up again. Permanent fault codes are important as they identify issues that consistently affect the performance of your Case IH equipment.

Summing up

At the heart of every modern and technologically advanced Case IH agricultural equipment lies a computer system that is called the Electronic Control Unit (ECU). It is an integral component and an intricate system that tracks the performance of the equipment and ensures that everything is performing as per set parameters. However, when something goes off the track, the Case IH fault codes come into the picture, and with our Jaltest software, you can know what the precise problem is and fix it.

New Holland is a force to reckon with in the niche of agricultural machinery and equipment. The company manufactures tractors, hay tools and spreaders, combines and headers, forage equipment, wheel loaders, skid steer loaders, and a whole lot more. Hence, if you are have any or more of such equipment, having a New Holland fault code reader should be a must-have to keep them always on the job.

Before going to the New Holland fault codes list, it is necessary to get an overview of New Holland agricultural equipment.

Leading the pack is New Holland’s extensive range of tractors ranging from compact ones to specialty models that are powerful enough to tackle any farm challenges. New Holland telehandlers and front loaders offer great versatility, lifting capacity, and efficiency. With New Holland combine harvesters you get the latest innovations in harvesting technology with high-performance machines and specialized grain and maize headers.

What sets the company’s products apart is the constant improvements in the machinery, an example being the launch of methane-powered tractors.         

What does the New Holland fault codes list have to offer? It is a built-in system where you know about any fault in your equipment, regardless of whether it is critical components such as the engine, transmission, hydraulics, or any other backup parts. You can quickly diagnose any issue with the machinery and take necessary action before it becomes a major problem, leading to expensive downtime.

Our Jaltest diagnostic software is a highly optimized maintenance tool that checks out the New Holland fault codes list and offers cutting-edge solutions. Whether it is New Holland tractor fault codes or transmission fault codes, you are assured of resolutions and services that are in no way less than those offered by dealers. These include basic and complex diagnostics like force regens, SCR System Verifications, code injectors, and much more are covered by our New Holland fault code reader.  

Contact us to know about our New Holland agricultural equipment and diagnostic software.

Maintenance Tool and The New Holland Fault Codes List

For owners of New Holland agricultural equipment, breakdowns and downtime are not uncommon. In peak seasons, such stoppage of work leads to disruptions in various areas of work and harvesting schedules going awry, necessitating urgent dealer-level servicing, and calling in maintenance personnel.

However, with our New Holland fault codes list, this elaborate process becomes redundant. All that you must do is connect the Jaltest maintenance tool to the New Holland equipment and what is causing any problem appears on the laptop screen before you along with the resolution needed. This ensures that your farming equipment is always in top gear in performance.  

The New Holland fault code is maximized on all models of equipment. For example, if you have the fault code reader, it is good for the T9 Series, Genesis T8 Series, T7 Series, and so on of tractors and telehandlers. Just one diagnostic software assists you in troubleshooting issues and reading New Holland tractor fault codes, New Holland transmission fault codes, and more.

The Scope of the New Holland Fault Codes List

There is an almost unlimited scope of the functions that can be performed with the Jaltest New Holland troubleshooting and maintenance tool. You can go through either a full system scan where the full New Holland fault codes list is checked for any malfunctions. Or you can scan specific systems such as transmissions, hydraulics, and others to go to the root of issues.

The New Holland fault code reader connects you to the CAN network of your equipment so that you can retrieve fault codes and clear them, monitor parameters, and more. You can check the fault codes by entering the correct ECU (Electronic Control Unit) for the model, and selecting Read Fault Codes.

For instance, the engine diagnostic software checks and performs force regen to clear the diesel particulate filter of soot, thereby preventing your equipment from going into limp mode. Further, with the code injector scanner, you can change the code of the ECU.  

Read more to know about the New Holland troubleshooting tool.

New Holland Troubleshooting Electronic Service Tool (EST)

One of the USPs of New Holland’s agricultural and farm equipment is the ability of its customers to service their machinery through the Electronic Service Tool (EST). They offer a version that is accessible by the owners who can connect to the CAN network via a laptop.

Among the many features offered by the EST are parameter monitoring, fault code retrieval and clearing, controller status and version retrieval, New Holland fault codes list descriptions and repair process, and electrical and hydraulic schematics. You also get an electronic version of service manuals.

New Holland Fault Code Resolution

The Jaltest New Holland fault code reader offers in-depth coverage of your New Holland agricultural equipment. All systems and parts are backed by us including transmissions, central computers, engines, hydraulics, and more, thereby providing quick resolutions to any issue. From complicated procedures like force regens, code injectors, calibrating and troubleshooting transmissions, to PTO, rear hitch, suspension, steering, and others, the New Holland diagnostic software has you covered.  

The New Holland fault code reader has a very user-friendly dashboard. The software walks you through even highly technical data and information so that you can easily take appropriate action to clear the New Holland fault codes list and keep your equipment in peak performance mode.

The maximized diagnostic tool offers a menu that offers a choice of technical data, wiring diagrams, troubleshooting by symptoms, and more. Once you access the menu, you get several options like main system scans, full system scans, special functions, and manual diagnostics.    

Our fault codes list provides comprehensive coverage of your New Holland agricultural equipment. Among the critical activities carried out by the troubleshooting tool is force regens which assesses the state of the engine diesel particulate filter (DPF). The New Holland fault code reader checks the extent of soot buildup in the DPF and clears the fault code through force regens, thereby ensuring the performance of the equipment.  

New Holland Fault Codes List for Key Components

While the New Holland fault code reader offers a wide coverage of key components of the company’s agricultural equipment, a few examples only will be taken up in this post to better explain the concept of fault codes.

Sample New Holland Fault Codes List of Engines :

111: Engine Controller Failure – Hardware Failure

135: Oil Pressure Sensor Voltage is very high

191: A/C clutch driver shorted to ground when ON

221: Ambient Air Pressure Sensor Voltage is too high (222 for too low)

272: Front Pumping Control Valve current is high

329: CAPS Pump has an over-pumping failure

419: Boost pressure data invalid

449: Fuel pressure has exceeded the warning limit

547: Fuel pressure sensor voltage is too low

697: Engine Controller Internal temperature too high

Sample New Holland Fault Codes List of Transmission :

24: None of the transmission clutches are calibrated

47: The clutch pedal bottom of the clutch switch misadjusted

70: Battery storage is too low for clutch solenoid operation

77: No signal from wheel speed sensor  

133: Reverse clutch is not calibrated

These are just two examples of the extent of the coverage of the New Holland fault code and include a lot of other components as well such as the Arm, Hitch, and more.

Moreover, the fault codes are good for both stationary and non-stationary equipment. Hence the ambit of the fault codes includes tractors, combine harvesters, forage harvesters, balers, self-propelled sprayers, haying tools, seeding equipment, and others.

With the Jaltest diagnostic software, you can easily discover any faults with your machine. This is possible through guided fault diagnosis backed by linked technical information of wiring diagrams, components testing, and vehicle repair/service data. Apart from these roles, our software has advanced functions such as parameter modification, component actuation, calibrations, system checks, and others.

Moreover, you will receive regular updates to the software throughout the year. This is to keep abreast of the latest technological innovations in New Holland agricultural equipment so that this specialized maintenance tool never becomes obsolete.  

All this makes it essential for owners of New Holland agricultural equipment to have the Jaltest New Holland fault code reader to keep their equipment on the job.   

Summing up

When you select the Jaltest New Holland fault code reader, you are getting a tool that is powerful and comprehensive. With its user-friendly menu and ability to tackle complex procedures easily, it is the diagnostic software to have if you want the equipment to function seamlessly without downtime.

Before going down to the Bobcat fault code list, a quick overview of Bobcat machines will be in order.

Bobcat machines are versatile pieces of heavy equipment with a range of applications from construction to agriculture to landscaping, and more.  They have a track record of being rugged and dependable with a minimum of downtime. Among the Bobcat heavy equipment most used are skid steer loaders, track loaders, backhoe loaders, telehandlers, compact excavators, rotary telescopes, and more.

It was Melroe Manufacturing Company that originally started building Bobcat equipment. However, the company changed hands several times till it was finally sold to the Doosan Group of South Korea, the present owners, for $4.9 billion by the Clark Equipment Company which presently operates as Bobcat Company.  

Bobcat equipment is powerful enough to be used for a host of tasks.

# Excavation works such as levelling land, clearing debris, and digging trenches.

#  Loading and hauling materials such as gravel, dirt, and debris.

# Demolition where Bobcat equipment is used for breaking down concrete structures and removing walls.

# Landscaping as Bobcat machines are ideal for grading, levelling, and clearing land for construction projects or otherwise.  

Diagnostic Software and Bobcat Fault Code 

For fleet owners of Bobcat construction equipment, downtime, and breakdowns are common occurrences, necessitating dealer-level servicing or calling in maintenance engineers. However, our Jaltest Bobcat fault code list ensures that any issues are promptly identified and corrective action is taken before they become full-blown problems. Hence your Bobcat equipment always performs in peak performance mode.

Our Bobcat fault code maintenance software is good for a wide section of Bobcat systems and models of construction equipment. They include the A series, S series, T series, and E series. Hence, regardless of whether it is Bobcat mini excavator fault codes or Bobcat skid steer fault code list, we have you covered. You can also troubleshoot issues with the Bobcat fault code on Bobcat skid steer joystick controls, identify rail pressure control faults, SJC controls, and more.

There is no limit on what you can do with the Jaltest Bobcat diagnostic software. The software ensures that any trouble with the Bobcat equipment is quickly diagnosed and rectification solutions are set in motion. There is an option to undertake either full system scans to check the overall equipment functioning or carry out scans by specific systems (shortcuts). In all cases, you are assured of optimized solutions and dealer-level services.

Contact us to know more about the Bobcat diagnostic software.

Fault Code List For Your Bobcat Construction Equipment 

The Bobcat fault code list contains virtually everything that requires troubleshooting of your Bobcat equipment. Every system and component are covered by the Bobcat fault code that indicates what specific part the issue is on. It goes right down to the specifics such as something to do with the right front or left rear wheel as well as the solenoid that is not functioning as it should in the circuits of the machine.  

Bobcat fault codes, just as with other manufacturers, are designed to work within a specific ecosystem. The Jaltest software is optimized to interpret the codes, just like the manual, to identify any issue and take preventive action.

What Does the Bobcat Fault Code List Indicate 

Fault code lists indicate the performance and the function of your equipment. Bobcat fault codes can pop up when certain metrics are not where they should be. They may relate to battery or sensor supply voltage, fluid levels, hydraulic oil temperature, and more. The built-in volt and temperature sensors as well as the speed sensors will not only alert you to the fault codes but also provide the required details such as out of range high or low.

While there are several aspects that can result in a malfunctioning machine, some issues are more common than others. We will now go into examples of some common trouble codes and how to fix the issues.

Bobcat Fault Code M0909: This error code shows when the fuel level is too low and can be seen on both the M-series Bobcat loaders as well as telehandler models. This is one code that does not require any complex procedures to do away with, simply refuel and it is gone.

H7404 Fault Code: This fault code means that there is no link with the main controller and that it is not receiving adequate power. It might also mean that the transmission might not be lubricated. Check the surroundings where the Bobcat equipment has been working or is stationary for fluid leaks.

H3916 Fault Code: This fault code means that the left joystick is not connected and there is no communication with it. This error is common on M-series Bobcat mini excavators and loaders. Refer to the Jaltest diagnostic software for a solution. It might either be a software issue such as an interrupted connection or no signal or a hardware issue that necessitates replacement of the joystick.

Where To Check the Bobcat 

Bobcat fault codes list is typically displayed on the instrument panel or the control display of the Bobcat equipment. However, these panels are not standardized and may vary depending on the type of machine – excavators, telehandlers, and so on – the model, features, and the year it was manufactured.

Here are some examples of where the fault codes are located in some types of Bobcat equipment.

R Series and similar: Select the “service codes” on the touchscreen and check the active fault code on the screen. You can also see all the error codes that have been shown before and access the service schedule of the machine and the service record. For models of Bobcat equipment that do not have a touchscreen, rotate the knob, and arrive at the “service codes”        

M2 Series and similar: For Bobcat equipment that comes with a deluxe panel, move to the “active warnings” But if you simply have a panel with display and gauges, press the information button and you will navigate to a screen with an open book symbol with a wrench on top. The Bobcat fault code list will be displayed here and you can check them even if there are multiple error codes.

T Series: Then there is the T-series also which has different fault codes. Take the example of the fault code list for the T 770 or T 650 and the D7517 fault code. It denotes short to ground or an open circuit in the lift arm solenoid valve coil. The Jaltest troubleshooting tool will resolve the issue. The wiring harness and connectors associated with the left solenoid valve need to be checked for damage, corrosion, or loose connections. If the resistance of the solenoid valve falls outside the set parameters, it needs to be changed. Go through our component replacement guide for advice in this regard.

Other Bobcat equipment like compact tractors will show warning lights and symbols on the display screen to show a fault code.  

Read more about display signals on Bobcat construction equipment.

Bobcat Fault Code List Removal And Diagnostic Software

With the Jaltest troubleshooting tool, doing away with Jaltest fault codes is not a complex procedure. Access the system dashboard and choose the model that has to be diagnosed. It might be hydraulic systems, power modules, transmission, fault codes H2607, M5306, Bobcat 753, 763, and others. Calibrate the raising and tilting actuators in AJC (Advanced Joystick Controls) and the hydrostatic pump in selectable joystick control (SJC) skid steers.

You can also check the Kubota engine fault code list and undertake optimized diagnostic processes of your Bobcat equipment engines. The same goes for Doosan engine diagnostic which also powers the Bobcat construction equipment. In addition to the engines, our software links up to the auxiliary controller, body computers, hydraulic systems transmissions, and more.

One very critical engine fault code removal that requires special mention is force regens and after-treatment systems for Bobcat compact construction equipment. The software analyzes this maintenance activity and takes necessary action to prevent soot build-up inside the Diesel Particulate Filter (DPF) and stop the equipment from going into limp mode.

Our user-friendly diagnostic menu comes with several parameters. Get maintenance data, vehicle data, and system technical data that will guide you through the various diagnostic parameters such as the exhaust gas treatment system, the electronic module, and the remote hydraulic controller.  

Every component like the central computer, electronic module, instrument cluster, hydraulics, and more is covered by the system scan.

Check the compatibility of your maintenance tool with Bobcat construction equipment.

Summing Up

Check out the Jaltest maintenance software for the Bobcat fault codes list. It has a user-friendly dashboard and does not require any elaborate setup or configuration process to install on your diagnostic laptop. This is where this tool is a cut above the others in this field. Further, we provide three updates to the software every year to keep in tune with upgrades of the Bobcat equipment if any. This is an assurance that the software never goes out of date.