Mon - Sat, 7:30am - 7:30pm

Sales & Support- service@mechnician.com

How to diagnose a Deutz engine using Jaltest Software

How to diagnose a Deutz engine using Jaltest Software

Jaltest is a comprehensive diagnostic software tool used for troubleshooting and diagnosing issues in various types of equipment, vehicles, and engines like those from Deutz. Below, you will find an outline to troubleshoot Deutz engines using Jaltest software:

1. Connect Hardware and Software:

  • Ensure you have the appropriate hardware interface (diagnostic adapter) that connects your computer to the Deutz engine's electronic control unit (ECU).
  • Install and open the Jaltest software on your computer.

2. Establish Communication:

  • Connect the diagnostic adapter to the OBD-II port or the designated diagnostic port on the Deutz engine.
  • Connect the other end of the adapter to your computer's USB port.
  • In the Jaltest software, select the appropriate Deutz engine model and establish a connection with the ECU.

3. Read Fault Codes:

  • Use the Jaltest software to read and retrieve any fault codes stored in the engine's ECU.
  • Fault codes are alphanumeric codes that indicate specific issues or malfunctions in the engine's systems. These codes can provide insight into what might be causing the problem.

4. Interpret Fault Codes:

  • Once you have the fault codes, refer to the Jaltest software's documentation or the Deutz engine's service manual to interpret the codes.
  • Each code corresponds to a specific issue. Understanding what each code means will help you pinpoint the problem.

5. Diagnose the Issue:

  • With the fault codes in hand, use the software to access diagnostic data such as sensor readings, live data, and historical data.
  • Analyze this data to understand the conditions leading up to the fault codes and to identify any anomalies in the engine's performance.

6. Perform Tests:

  • Depending on the Jaltest software's capabilities, you may be able to perform various tests on the engine's components, such as actuators, sensors, and valves.
  • Follow the software's instructions to carry out these tests and assess whether the components are functioning correctly.

7. Follow Repair Procedures:

  • Based on the diagnosis, follow the recommended repair procedures outlined in the Deutz engine's service manual or the Jaltest software.
  • This could involve replacing faulty components, performing maintenance tasks, or making adjustments.

8. Clear Fault Codes (Optional):

  • If you have resolved the underlying issue, you can use the Jaltest software to clear the fault codes from the engine's ECU memory.
  • Clearing the codes will reset the warning lights on the dashboard, but it's important to make sure the issue is truly resolved before doing this.

    9. Recheck and Verify:

    • After making repairs, re-run the diagnostic tests and read the fault codes again to ensure that the issues have been successfully resolved.

    Conclusion

    Diagnostics are essential for maintaining the performance and reliability of Deutz engines. With the right tools and techniques, technicians can identify and resolve issues efficiently, minimizing downtime and optimizing engine performance. Jaltest is that comprehensive diagnostic software tool!  Advanced features and user-friendly interfaces make them an excellent choices for technicians of all levels. By embracing the tools and techniques outlined in this guide, technicians can ensure that their Deutz engines continue to operate at their best, delivering power and reliability in a variety of applications. Will you be contacting mechnician for your system today?


    Leave a comment

    Please note, comments must be approved before they are published

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


    A Step-by-Step Guide To Bobcat Fault Code List Resolutions

    A Step-by-Step Guide To Bobcat Fault Code List Resolutions

    Before going down to the Bobcat fault code list, a quick overview of Bobcat machines will be in order.

    Bobcat machines are versatile pieces of heavy equipment with a range of applications from construction to agriculture to landscaping, and more.  They have a track record of being rugged and dependable with a minimum of downtime. Among the Bobcat heavy equipment most used are skid steer loaders, track loaders, backhoe loaders, telehandlers, compact excavators, rotary telescopes, and more.

    It was Melroe Manufacturing Company that originally started building Bobcat equipment. However, the company changed hands several times till it was finally sold to the Doosan Group of South Korea, the present owners, for $4.9 billion by the Clark Equipment Company which presently operates as Bobcat Company.  

    Bobcat equipment is powerful enough to be used for a host of tasks.

    # Excavation works such as levelling land, clearing debris, and digging trenches.

    #  Loading and hauling materials such as gravel, dirt, and debris.

    # Demolition where Bobcat equipment is used for breaking down concrete structures and removing walls.

    # Landscaping as Bobcat machines are ideal for grading, levelling, and clearing land for construction projects or otherwise.  

    Diagnostic Software and Bobcat Fault Code 

    For fleet owners of Bobcat construction equipment, downtime, and breakdowns are common occurrences, necessitating dealer-level servicing or calling in maintenance engineers. However, our Jaltest Bobcat fault code list ensures that any issues are promptly identified and corrective action is taken before they become full-blown problems. Hence your Bobcat equipment always performs in peak performance mode.

    Our Bobcat fault code maintenance software is good for a wide section of Bobcat systems and models of construction equipment. They include the A series, S series, T series, and E series. Hence, regardless of whether it is Bobcat mini excavator fault codes or Bobcat skid steer fault code list, we have you covered. You can also troubleshoot issues with the Bobcat fault code on Bobcat skid steer joystick controls, identify rail pressure control faults, SJC controls, and more.

    There is no limit on what you can do with the Jaltest Bobcat diagnostic software. The software ensures that any trouble with the Bobcat equipment is quickly diagnosed and rectification solutions are set in motion. There is an option to undertake either full system scans to check the overall equipment functioning or carry out scans by specific systems (shortcuts). In all cases, you are assured of optimized solutions and dealer-level services.

    Contact us to know more about the Bobcat diagnostic software.

    Fault Code List For Your Bobcat Construction Equipment 

    The Bobcat fault code list contains virtually everything that requires troubleshooting of your Bobcat equipment. Every system and component are covered by the Bobcat fault code that indicates what specific part the issue is on. It goes right down to the specifics such as something to do with the right front or left rear wheel as well as the solenoid that is not functioning as it should in the circuits of the machine.  

    Bobcat fault codes, just as with other manufacturers, are designed to work within a specific ecosystem. The Jaltest software is optimized to interpret the codes, just like the manual, to identify any issue and take preventive action.

    What Does the Bobcat Fault Code List Indicate 

    Fault code lists indicate the performance and the function of your equipment. Bobcat fault codes can pop up when certain metrics are not where they should be. They may relate to battery or sensor supply voltage, fluid levels, hydraulic oil temperature, and more. The built-in volt and temperature sensors as well as the speed sensors will not only alert you to the fault codes but also provide the required details such as out of range high or low.

    While there are several aspects that can result in a malfunctioning machine, some issues are more common than others. We will now go into examples of some common trouble codes and how to fix the issues.

    Bobcat Fault Code M0909: This error code shows when the fuel level is too low and can be seen on both the M-series Bobcat loaders as well as telehandler models. This is one code that does not require any complex procedures to do away with, simply refuel and it is gone.

    H7404 Fault Code: This fault code means that there is no link with the main controller and that it is not receiving adequate power. It might also mean that the transmission might not be lubricated. Check the surroundings where the Bobcat equipment has been working or is stationary for fluid leaks.

    H3916 Fault Code: This fault code means that the left joystick is not connected and there is no communication with it. This error is common on M-series Bobcat mini excavators and loaders. Refer to the Jaltest diagnostic software for a solution. It might either be a software issue such as an interrupted connection or no signal or a hardware issue that necessitates replacement of the joystick.

    Where To Check the Bobcat 

    Bobcat fault codes list is typically displayed on the instrument panel or the control display of the Bobcat equipment. However, these panels are not standardized and may vary depending on the type of machine – excavators, telehandlers, and so on – the model, features, and the year it was manufactured.

    Here are some examples of where the fault codes are located in some types of Bobcat equipment.

    R Series and similar: Select the “service codes” on the touchscreen and check the active fault code on the screen. You can also see all the error codes that have been shown before and access the service schedule of the machine and the service record. For models of Bobcat equipment that do not have a touchscreen, rotate the knob, and arrive at the “service codes”        

    M2 Series and similar: For Bobcat equipment that comes with a deluxe panel, move to the “active warnings” But if you simply have a panel with display and gauges, press the information button and you will navigate to a screen with an open book symbol with a wrench on top. The Bobcat fault code list will be displayed here and you can check them even if there are multiple error codes.

    T Series: Then there is the T-series also which has different fault codes. Take the example of the fault code list for the T 770 or T 650 and the D7517 fault code. It denotes short to ground or an open circuit in the lift arm solenoid valve coil. The Jaltest troubleshooting tool will resolve the issue. The wiring harness and connectors associated with the left solenoid valve need to be checked for damage, corrosion, or loose connections. If the resistance of the solenoid valve falls outside the set parameters, it needs to be changed. Go through our component replacement guide for advice in this regard.

    Other Bobcat equipment like compact tractors will show warning lights and symbols on the display screen to show a fault code.  

    Read more about display signals on Bobcat construction equipment.

    Bobcat Fault Code List Removal And Diagnostic Software

    With the Jaltest troubleshooting tool, doing away with Jaltest fault codes is not a complex procedure. Access the system dashboard and choose the model that has to be diagnosed. It might be hydraulic systems, power modules, transmission, fault codes H2607, M5306, Bobcat 753, 763, and others. Calibrate the raising and tilting actuators in AJC (Advanced Joystick Controls) and the hydrostatic pump in selectable joystick control (SJC) skid steers.

    You can also check the Kubota engine fault code list and undertake optimized diagnostic processes of your Bobcat equipment engines. The same goes for Doosan engine diagnostic which also powers the Bobcat construction equipment. In addition to the engines, our software links up to the auxiliary controller, body computers, hydraulic systems transmissions, and more.

    One very critical engine fault code removal that requires special mention is force regens and after-treatment systems for Bobcat compact construction equipment. The software analyzes this maintenance activity and takes necessary action to prevent soot build-up inside the Diesel Particulate Filter (DPF) and stop the equipment from going into limp mode.

    Our user-friendly diagnostic menu comes with several parameters. Get maintenance data, vehicle data, and system technical data that will guide you through the various diagnostic parameters such as the exhaust gas treatment system, the electronic module, and the remote hydraulic controller.  

    Every component like the central computer, electronic module, instrument cluster, hydraulics, and more is covered by the system scan.

    Check the compatibility of your maintenance tool with Bobcat construction equipment.

    Summing Up

    Check out the Jaltest maintenance software for the Bobcat fault codes list. It has a user-friendly dashboard and does not require any elaborate setup or configuration process to install on your diagnostic laptop. This is where this tool is a cut above the others in this field. Further, we provide three updates to the software every year to keep in tune with upgrades of the Bobcat equipment if any. This is an assurance that the software never goes out of date.

    Common Kubota Diesel Engine Problems And DIY Fault Codes Solutions

    Common Kubota Diesel Engine Problems And DIY Fault Codes Solutions

    Kubota is among the leading manufacturers of compact diesel engines in the world, being among the first to pass the U.S CARB ULGE emission regulations for engines under 25 HP. They also have a range of engines up to 86.4k W running on various fuels such as diesel, gasoline, and natural gas, catering to the needs of various industrial applications, heavy construction and material handling equipment, agricultural and farm equipment, and more.

    To meet the diversified needs of customers, Kubota has launched the K 09 Series with a product range of up to 157.3 KW. However, the biggest advantage of Kubota engines is the advanced technology that is customized to meet environmental requirements.

    It all started with Kubota receiving the CARB certification of emission regulations (California Air Resources Board, USA) in 1993 for its small diesel engines. Since then, Kubota has always adhered to strict emission norms in keeping with their tag of pioneers in environmental technology. 

    Kubota Engine Fault Codes List and DIY Solutions

    Do you have a fleet of Kubota construction and heavy equipment such as tractors, skid steers, compact and backhoe loaders, excavators, and track loaders powered by the Kubota diesel engines? If your answer is yes, you cannot do without the Jaltest diagnostic software and Kubota fault codes reader to keep your equipment on the job and in peak performance mode. 

    Use our Kubota scan tool to monitor your Kubota equipment and identify any minor issues for corrective action before they become a major problem. The Jaltest Kubota engine fault codes offer deep coverage of your Kubota diesel engine-powered equipment by carrying out complex procedures such as force regence and code injectors. If you are a DIY enthusiast and would rather keep your Kubota engines in top working mode yourself than taking the help of maintenance engineers, our troubleshooting fault codes tool is the right software for you.

    Do not wait for any issue to become a full-blown problem, use our Kubota engine fault codes list to carry out full system scans at periodic intervals for assurance about the status of your equipment. These will include various metrics like bi-directional functions and oil-flow adjustments with full access to all wiring diagrams. Alternatively, you can go by fault codes and undertake scans by symptoms so that specific issues can be resolved.

    Click here for more information on the Kubota engine fault code list.

     

    Kubota Engine Fault Codes and Solutions

    One of the main problems that owners of Kubota engine-propelled equipment struggle with is deciphering the system issues that are displayed on the dash through error codes. Fortunately, the Jaltest diagnostic tool offers convenient solutions to troubleshoot and reset Kubota fault codes so that your equipment is back on the job at the earliest.

    There are hundreds of Kubota error codes that make it difficult to identify specific problems but leaving them to grow to a level where very expensive repairs are needed is not an option to be exercised. Given here is all that you need to know about Kubota fault codes.

    Common issues that crop up in Kubota engine fault codes list

    Even though Kubota diesel engines are reliable and high-performing, some issues often show up that require immediate attention for optimized performance. Let us check the most common ones.

    # Engine not cranking: While this might be a common issue with Kubota equipment owners, the fault is usually traced to a dead battery. However, if the battery is fine, check for a fault switch or a corroded cable. Your Jaltest diagnostic tool will handhold you through a component replacement guide to have this issue fixed.

    # Overheating of engine: This is often the result of dirt or debris that affects proper ventilation and low radiator airflow.

    # Non-responsive ignition key: It might appear to be a major problem but it is often because of simply a failing key cylinder.

    # Dying engine: Typically, the cause of this issue is a mixture of two different fuels mixing in the engine. Just flushing and draining everything thoroughly is an answer to this issue.

    Common fault codes in Kubota

    The Kubota engine fault codes that you might face are unique to specific issues. While our software will help you identify them, here is a sample of the more common ones along with the solutions that will show up on the Jaltest troubleshooting tool.

    # P3001: Deterioration of emissions due to a high soot build-up in the diesel particulate filter or in the after-treatment system. Ignoring this can lead to your equipment going into limp mode. The Jaltest Kubota diesel engine software identifies this problem and carries out forced regens that automatically burn away the soot accumulation.

    # P0087: When this shows in the Kubota engine fault code list, it indicates low fuel rail or system pressure due to several possibilities. It might be a faulty fuel pump, damaged or kinked fuel lines, faulty fuel rail pressure sensor, or bad fuel filter or screen, among others. Our software will diagnose the root cause and guide you through the best solution including component replacement.

    # P0563: There are possibilities of a couple of issues here. It might either be battery voltage abnormality generally from the extra power boost required during a jumpstart or charging system errors. The batteries and alternator should be tested to get to the bottom of this fault code.

    # P2293: This is a sign of abnormal fuel pressure regulator performance and changing the component is the right solution.

    # P2294: This fault code indicates wiring issues or a malfunctioning fuel pressure regulator or fuel pump. The equipment faces poor engine performance and high fuel consumption. A DIY solution is to replace the regulator or refuel or bleeding the fuel system provided the wiring is found to be alright as per the diagnosis of the Jaltest software.   

    # P3008: This code on the dash means the cam position sensor circuit fault due to improper wiring or faulty sensors. Our troubleshooting tool will assist you in checking the wiring and if that does not resolve the issue, check the connector pins for damage and corrosion.  

    Contact us to know more about Kubota Diagnostic software.

    How to reset Kubota fault codes

    Resetting Kubota engine fault codes varies in complexity depending on the model of the equipment. However, Kubota engines are used on various types of construction and material handling equipment and hence, the fault code clearing process is not standardized.

    Typically, though, it entails pressing buttons in a specific pattern and troubleshooting through effective and highly optimized diagnostic software. The tool will show the underlying issue that is causing a fault code and guide you through the menu to clear it.   

    As an example, let us go through the resetting of Kubota fault codes for the Kubota tractor. This will give a general idea of how this process is carried out.

    # There are two regeneration buttons next to the steering wheel. Press them and simultaneously turn the key on. You will find the letter “A” which is part of the “Target Mode” appears on the dashboard.

    # Press the Inhibit button to go through the “Target Mode” and go to B (error information clear mode). Hold this button for a couple of seconds. The word “PUSH” will pop up on your dash. Now, push and hold this button again until the dash shows “OFF”.

    # Turn the key off and back on again. The codes should not be there after this step.

    While this DIY method is an example of doing away with fault codes, use our Jaltest diagnostic software to get to the root of the problem. Link the troubleshooting laptop to the diagnostic connector in the equipment and you will be handheld through all the solutions that will make the Kubota fault codes go away.

    Check your engine compatibility with our Kubota engine fault codes list.

    Summing Up

    Why should you use the Jaltest Kubota fault codes reader and why is it a cut above others in this niche?

    Our Kubota diagnostic tool has a very user-friendly dashboard where you get all the technical and system information of your Kubota equipment at your fingertips. You can easily troubleshoot symptoms from the Kubota fault codes and get your equipment back on the job at the earliest.

    Our diagnostic menu offers all technical information. These include system technical data, detailed wiring diagrams, maintenance, and all vehicle data, releases and procedures, and very importantly component replacement guides. From each parameter, you get a wealth of information about your Kubota equipment such as engine scan, hydraulic calibration, and others.

    You can also carry out Kubota diesel engine troubleshooting to adjust operating speed and oil flow and check the pressure accumulator, all at dealer-service level. There are various other aspects that you can check on your Kabuto equipment such as hydraulics and transmission apart from the Kubota engine fault codes.
    The Ultimate Guide to Resolving Volvo Construction Equipment Fault Codes

    The Ultimate Guide to Resolving Volvo Construction Equipment Fault Codes

    Volvo construction equipment is a world leader in construction solutions. The company delivers premium products and services that not only combine power and performance but also have a sustainable working mode. Volvo construction equipment has a network that spans the globe with dedicated experts and a wide distribution network.

    From industry-leading loaders, haulers, and excavators, to motor graders, and more, Volvo has it all. The benefits from being a part of the Volvo Group which also includes buses, trucks, and power solutions for marine and industrial applications rub off on the Construction equipment section too.

    If you have a fleet of Volvo construction equipment, keeping them in peak performance mode should be at the top of your mind. You should get the most from your equipment without facing downtime and the resultant loss of profits. 

    This is now possible with the Volvo fault code reader, cutting-edge software for diagnostics and troubleshooting of Volvo construction equipment from Jaltest. The major advantage of this software tool is that it identifies any issue with the equipment and offers remedial recommendations before it becomes a full-blown problem. Volvo construction equipment fault codes clearly indicate what is wrong with the equipment and measures to take to get dealer-level solutions.  

    The Volvo fault codes list helps to get the best from the range of Volvo construction equipment regardless of the make or model. The Jaltest troubleshooting tool has a very intuitive and user-friendly dashboard that provides all Volvo construction equipment fault codes at your fingertips. All performance metrics are available on the laptop screen before you, from diagrams to maintenance data, from troubleshooting by symptoms to even guides on how to replace components.

    Contact us to know more about Volvo scanner tools.

     

    What Is Volvo Fault Codes List For Construction Equipment

    How to read Volvo fault codes

    Fault codes, also called diagnostic trouble codes (DTC) is a system that monitors, stores, and informs you of any faults so that corrective solutions may be initiated. There are Volvo engine fault codes, as well as those for electricals, transmission, ABS, hydraulics, and so on for every equipment system.  

    Now, how do you read a Volvo fault codes list? The process depends largely on the type of diagnostic tool being used. It can be a “read-only” tool or one where you need to access some menus. However, the following steps are largely common to all Volvo fault code readers of construction equipment.

    # Find the connector plug in the equipment to be diagnosed.

    # Power all accessories without the engine running. This means putting the key to point 2 without the engine igniting.

    # Plug in the scanner to the connector plug in your Volvo construction equipment. The Jaltest Volvo construction equipment fault codes diagnostic software automatically reads the codes and displays them on a dashboard to scroll through. You will be directed to the desired system to scan and in some cases, be prompted for the year, make, and model of your equipment.

    # Scroll through the various systems of our Volvo fault codes list and view specific trouble codes for diagnosis.  

    How To Clear Volvo Fault Codes

    You are now ready to clear the Volvo codes once your software is plugged in and the ignition is on Point 2. This process is almost the same for all Volvo construction equipment troubleshooting tool.

    # Make sure that your scanner is plugged in and turned on.

    # Select “Clear Codes” from the main menu.

    # At this point, the software will diagnose any issues and start rectification procedures for fault codes. You might receive some special instructions to follow. When you asked whether you want to clear the fault codes answer in the affirmative.

    # From here, you will be guided on resolving any issue through a variety of prompts and being asked to turn the engine on and off. Now you will receive either a “Success” message or a fault not cleared one. The latter message means the problem persists and other action is required.

    Check the compatibility of your equipment with our Volvo scanner tool.

     

    The Importance of Volvo ECU/ECM Code Readers

    ECU (Electronic control unit) is a microcomputer that is connected to the Volvo on-board computer system. These microcomputers continuously monitor the performance of the equipment and show Volvo ECU fault codes in case of any issues with the systems that are reported back to the ECU through sensors.

    Various systems are regulated via actuators by the ECU that include the engine, HVAC, brakes, doors, and a host of others. The Volvo ECU fault codes show up on our diagnostic software when any of these systems are mal-functioning.

    On the other hand, the Electronic Control Module (ECM) is a type of ECU that controls and monitors the engine. It is through the ECM that the Volvo engine fault codes are tracked.

     

    What Are The Signs Of A Failing ECM

    The performance of your equipment will be affected if Volvo ECM fault codes are seen. Here are some signs to watch out for.

    # The first indication of Volvo ECM fault codes is when the CEL (Check Engine Light) or the MIL (Malfunction Indicator Light) on the dashboard gets activated. It means that some issues need to be checked whether it flickers or stays on continuously. Check the systems with our software diagnostic tool to decipher the problem and get a solution.

    # Poor performance is another sign of a problematic ECM. Some aspects include decreased power and even stalling. It means that the ECM is unable to control and regulate the different systems such as ignition timing, fuel mixture, or anything similar.

    # If your Volvo construction equipment is struggling to start or suddenly stalls after starting, it shows some issue with the ECM. Our Troubleshooting tool will guide you through the steps to rectify this problem through the Volvo engine fault codes list.

    # A sudden drop in gas mileage is a sign of a faulty ECM.

    # If your Volvo construction equipment is facing transmission problems such as delayed gear changes or unexpected shifting, it might be that the ECM is not communicating with the Transmission Control Module (TCM) which is another ECU.

    # Arbitrary Error Codes show up in Volvo ECM fault codes when several MILs get activated. It means that the ECM cannot communicate with other systems such as traction control and others and their warning lights in turn will light up. This shows that the ECM sensor is failing. Use the Jaltest troubleshooting too to be sure about it and take necessary measures to rectify it.

    # Finally, the Volvo construction equipment will be unable to communicate with the scanner. The onboard diagnostic scanner scans different systems and identifies the various Volvo construction equipment fault codes. Our software analyses these Volvo ECM fault codes and sets them right. In extreme cases of ECM failure, the Volvo OBD 2 will not be able to communicate with our troubleshooting tool.

    Read more about Volvo Electronic Control Modules.

     

    Deep Coverage of Volvo Construction Equipment with Fault Code Reader

    The Volvo fault code reader offers extensive coverage of all Volvo construction equipment across all its core models. You can go through the Volvo fault codes list and troubleshoot all problems for wheel loaders, off-road dump trucks, excavators, and more. Carry out specific functions (shortcuts) or thorough system scans and get dealer-level service with the Jaltest diagnostic software.

    With the Volvo engine fault codes, you can work seamlessly with the after-treatment system. The Jaltest troubleshooting tool allows you to perform force regens as a part of maintenance activity. It stops soot buildup in the diesel particulate filter, thereby preventing the Volvo construction equipment from going into limp mode. DPF forced regeneration service tools burns off soot accumulation, thereby keeping the equipment always in peak performance mode.

    Additionally, as discussed, it is possible to use the Volvo diagnostic tool to program the Electronic Control Module, ECM, of a Volvo engine. With the Volvo ECM fault codes, you can quickly know the attributes of the fuel injectors, thereby maintaining engine performance and extending its lifecycle.   

    Summing Up

    What do you get from the Jaltest Volvo fault code reader? You get all the critical information required to keep your equipment on the job round the clock. The software is backed by detailed wiring diagrams and the necessary service instructions. Technical data on several key parameters such as instrument cluster, telematic module, exhaust gas treatment systems, engine gateway, electronic diesel control, and more is also available.

    Hence, from the Volvo fault codes list, preventive and rectification activities that are typically available only at high-end dealer networks can be performed. The Jaltest Volvo construction equipment diagnostic software ensures that you face minimum downtime for your equipment and that they are always in peak performance mode.
    Expert Tips For Caterpillar Construction Equipment Fault Codes Troubleshooting

    Expert Tips For Caterpillar Construction Equipment Fault Codes Troubleshooting

    Do you have a fleet of Caterpillar construction equipment such as dozers, excavators, skid steers, compact track loaders, articulated trucks, motor graders, and more? Do you routinely face unexpected issues with one or more of them that lead to downtime and a drop in return on capital invested? If your answer to one or both questions is a YES, you must have the cutting-edge Jaltest Caterpillar fault codes troubleshooting software as a backup to take care of your worries.

    Our Caterpillar fault code is among the finest in this niche, providing great coverage for all types of Caterpillar construction equipment.  With our troubleshooting tool, you ensure that any minor issues with your Caterpillar construction equipment do not grow into a full-blown major problem and that they are always in peak performance mode.

    What makes our diagnostic tool especially popular is that it is customized for a wide range of makes, models, and types of Caterpillar construction equipment. These include but are not restricted to Cat d6t dozer, Cat 930H wheel loader, Cat 259D compact track loader, 336F excavator, Skid steers, and many others.

    Our Caterpillar diagnostic computer has a very intuitive and user-friendly dashboard. You can easily access every form of technical data such as engines, hydraulics, and transmissions and carry out system scans to track any glitches. Quick solutions are offered by our troubleshooting tool which is no less than dealer-level service.

    Click here to learn about the Jaltest Diagnostic Software

    A Technologically Advanced Caterpillar Fault Codes Troubleshooting Tool

    If you are looking for the #1 Caterpillar fault code diagnostic software, Jaltest should be your one-stop destination. The tool offers deep coverage of a wide range of systems and components and carries out bi-directional functions and force regens to prevent your equipment from going into limp mode. 

    When you troubleshoot any fault codes for your Caterpillar equipment, there are two ways that you can do so. One is to carry out full system scans so that the functioning of the full equipment is comprehensively checked. The other is to undertake rectification measures as per specific issues that might crop up. The software will give you detailed instructions about the resolving activity to be carried out and soon your equipment will be back on the job.

    In both full system or specific troubleshooting scans, it is ensured that your equipment is continually kept on the job.

    Caterpillar Engine Fault Codes Troubleshooting – A Critical Maintenance Activity

    When the engine warning lights come on in Caterpillar construction equipment, you may ignore it at your own peril. If you find the engine running rough or sounding abnormal, the only thing that you should do is reach for the Caterpillar engine fault codes software and check what it indicates.

    Normally, you should not operate the vehicle but if you do to take it where the fault can be diagnosed and resolved, ensure that the warning lights for other critical components such as the transmission and brake lights are off. 

    The biggest problem with Caterpillar fault codes troubleshooting is that it is hard to say what the fault is without cutting-edge diagnostic software. It may be anything from a loose wire to something more vital like soot buildup in the diesel particulate filter.

    That brings us to the Jaltest Caterpillar fault codes list that analyses code injectors and does force regens as a part of maintenance activity. Force regens stop soot buildup in the diesel particulate filter and prevent the vehicle from going into limp mode. However, our Caterpillar scanner performs force regens up to Level 2 only though we go way beyond that for other make of construction equipment.

    Further, our Caterpillar engine fault codes software has another powerful maintenance tool and that is the code injector scanner. It helps you to change the code injector in the Electronic Control Module (ECM) every time an injector is replaced or installed.

    Check your equipment compatibility with our Caterpillar Diagnostic Software.

    Resolving the Caterpillar Excavator Fault Code List

    In the last section, we have seen the deep coverage of Caterpillar engine fault codes and how to clear the critical ones. Let us now examine the Caterpillar excavator fault codes list as Cat excavators are among the top five in the world. This equipment is reputed for its stable quality and ability to work in extremely challenging terrain.

    However, like all construction equipment, the excavator fault code alarm might go off from time to time. Most people handling a Cat excavator do not have a clue about the alarm because they do not understand simple fault codes. When the Caterpillar fault code is displayed on the dashboard the first impulse is to contact the dealer or a trained maintenance master. This leads to a lot of time and financial resources being wasted. 

    If you understand the fault codes and have the Jaltest Caterpillar fault codes troubleshooting software you do not have anything to worry about. The fault description is clearly marked in our diagnostic tool and you have to follow the instructions to get your equipment back on the job. Detailed wiring diagrams, technical information, and vehicle maintenance data are provided in our software.

    A few examples will illustrate this point better. For instance, E1 is the engine oil pressure is too low, E7 is the engine speed is abnormal, Error code 2301 is the Governor actuator feedback signal is unstable, and so on. Along with the Caterpillar excavator fault codes list, you get deep coverage of the resolutions too that are no less than dealer-lever servicing. Keep in mind though that the Error Codes differ between excavator models hence, be careful when reading the error codes and taking corrective action.    

    How Do You Check The Caterpillar Fault Codes List

    You must follow certain steps to check the Caterpillar fault codes list including going by the prompts offered by our software. Let us go through them step-by-step.

    # Plug in the Jaltest scanner to the Caterpillar equipment. It will link wirelessly from the equipment to our device or diagnostic laptop. The software will start to scan only when the engine is switched on and running. You might be prompted for certain additional information regarding the make and model. Remember, in the last section, we told you that the Error Code varies by model.

    # It does not take long for the fault code and the potential problem to appear on our troubleshooting tool. When an issue crops up as to how your equipment is operating, it is recorded as a standardized code on the onboard computer.

    # Not all Caterpillar diagnostic software is created equal. While some may trace an issue immediately, the more complex ones have a wider range of capabilities. Hence, if you have a fleet of Caterpillar construction equipment, it pays to invest in the Jaltest Caterpillar troubleshooting software due to its immense diagnostic abilities.  

    # When the diagnostic code appears on the software, you will also get basic information about what is causing the problem. This helps if you are calling the maintenance master or relying on the software to resolve the issue. Something is not right if the two differ.

    Contact us to know more about Caterpillar diagnostic scanner tools.

    Hallmarks Of An Optimized Caterpillar Troubleshooting Tool

    A highly optimized Caterpillar fault codes list and troubleshooting tool provides fleet owners with a host of technologically advanced features and maintenance metrics. The Jaltest software allows you to diagnose various components by symptoms such as engine, hydraulic systems, powertrain, instrument cluster, transmission, and more.

    Additionally, with the Caterpillar fault codes list, you can take preventive action by calibrating joysticks and booms, setting up flows and pressures on excavators, and so much more. You can also perform dump on wheel loaders, calibrate the blade on a motor grader and transmissions, and others, thereby offering comprehensive diagnostic coverage of your Caterpillar equipment.

    Further, you also get access to wiring diagrams, component specifications, and other deep tech info to help you get solutions to any issue and keep your equipment on the job.

    Apart from the construction equipment, the Jaltest Caterpillar software is also good for stationary equipment with Perkins engines. Get highly-optimized diagnostics and troubleshoot for crushers, screen plants, tower lights, generators, and more.

    Summing Up

    In keeping with the technological innovations constantly being introduced by Caterpillar for their construction equipment, Jaltest also updates the diagnostic software three times every year. This considers all the fault codes and troubleshooting options available on the latest equipment. Our software, therefore, never becomes obsolete.

    Finally, apart from its ability to handle complex problems and all forms of Caterpillar fault code troubleshooting, there is another reason for our software to be immensely popular and a cut above our competitors. That is the ease of setting up and configuring the software. There are no elaborate procedures to follow, it is simply plugged in and you are ready to set right the full Caterpillar fault codes list.
    Back to News
    How To Diagnose A Deutz Engine using Jaltest Software - Mechnician