Volvo Diagnostic Software – The Ultimate Maintenance Tool for Your Volvo Construction Equipment

Marine engines are complex systems that require a lot of care and attention if you want your fleet of vessels and equipment running in peak performance mode. To ensure it, it is essential that you have the right marine diagnostic tool to effectively check on the health of the marine engine for optimal efficiency. This will also help you to carry out timely repairs or take preventive maintenance actions so that you are never stranded on the high seas or while zooming past on your jet ski.

Before going further with an in-depth analysis of marine diagnostic software, it helps if we investigate the differences between the two types of marine engines typically used, the outboard and the inboard engines.

Outboard engines are mounted on the transom externally and are more common in small boats. Inboard marine engines are mounted inside the hull of the vessel and are seen in larger boats and yachts. When it comes to checking on the health of the two, the outboard motor diagnostic tool and the inboard ones are specialized to provide accurate results. 

The main difference between an outboard diagnostic tool and an inboard marine diagnostic scanner is the way the tool is connected to the engine. For inboard engines, the boat diagnostic tool is connected to the onboard computer of the engine through a cable. On the other hand, an outboard diagnostic software communicates wirelessly with the outboard engine over Wi-fi or Bluetooth.

Apart from this singular facet of connectivity, the functionality of our Jaltest marine diagnostic tool is quite similar when used for both outboard and inboard engines. A comprehensive marine diagnostic software reads and interprets various issues and fault codes through different sensors to diagnose any issue with the engine, regardless of whether it is a minor or a major one. However, the marine engine diagnostic tool that you select will depend on the composition of your fleet of vessels and what meets your specific needs.

Selecting the Right Marine Diagnostic Software

Before getting into the world of boat diagnostic tools, you must select one that fulfills your specific diagnostic needs. Areas that must be of prime consideration are the type of engine, the frequency that you will need to use it (more if you have multiple boats), the kind of issues that are expected to crop up, and whether you need basic software or a more advanced tool such as Jaltest.

Once you are clear about all these metrics, you can get the right marine diagnostic computer that will ensure that your fleet performs at optimum efficiency. When you explore the market for marine diagnostic tools, you will find several of them. Ranging from basic handheld devices to highly advanced and sophisticated software. Once you understand their functionalities, you can come to an informed decision about which one to invest in.

If you buy a basic marine diagnostic scanner, it will be perfect for quick analysis of fault codes and routine maintenance activities. These tools are typically handheld scanners that read and interpret DTCs (Diagnostic Trouble Codes) that are more of a temporary nature.

They are also capable of performing basic functions such as furl system checks, sensor monitoring, displaying live data streams, ignition system checks, and more. The basic software is perfect if you have one or more marine vessels and your goal is to mainly focus on maintenance diagnostics.

As distinct from the basic maintenance tool, you also have the Jaltest advanced marine diagnostic scanner that fits your requirement for more comprehensive analysis and troubleshooting of your inboard or outboard engine. Our boat motor diagnostic tool uses specialized software programs that offer deeper and cutting-edge insights into any issue with the marine engines.

For example, our Jaltest marine outboard diagnostic tool provides cylinder balance tests, advanced data graphing, and compression tests. In short, you get comprehensive system diagnostics with the Jaltest marine diagnostic tool.  

Features of The Jaltest Boat Motor Diagnostic Tool

Our Jaltest advanced marine diagnostic software allows you to carry out both preventive checks and fault code clearance so that you are never left with downtime on your marine vessel. This is possible through our intuitive and very user-friendly dashboard that handholds you through all functions of the software, regardless of whether it is a minor or a major problem.

From the dashboard menu, you can carry out either full system scans or scan specific systems or components by symptoms. What is the difference between the two?

Full system scans are carried out periodically to ensure that all systems are working right and there are no small or large issues to contend with. In case any minor fault is detected by the marine engine diagnostic tool, it immediately reads and interprets the malfunction and initiates corrective solutions before it becomes a major issue. This is preventive maintenance to keep your engine constantly on the go.

The other function carried out by our Jaltest software is fault clearance where an issue crops up that must be attended to and set right at the earliest to ensure smooth performance of the vessel. You will be forewarned by certain symptoms which our Jaltest marine diagnostic tool will interpret and guide you on clearing the fault. This is the maintenance aspect of our software as against the preventive mode in the previous section.

The Jaltest outboard diagnostic software offers deep coverage of a wide range of marine engines, from Volvo Penta to Indmar, to Yamaha, to more. Our advanced software offers cutting-edge solutions and troubleshooting actions, irrespective of the seriousness of the issue and you will not be let down at critical phase of operations.

Even though our maintenance tool is good for both gasoline and diesel engines, it is the diesel maintenance software that is more in demand. 

The Jaltest marine diagnostic software takes care of a wide array of systems and components. These include the electronic modules, engines, helm, powertrain, steering, and more. Among the actions that can be seamlessly performed are calibrating trim and control levers, carrying out cylinder cut-out tests, and setting parameter instructions. Testing is fast and can be carried out flawlessly as all data can be tested live during sea trials at a very fast pace of 24 measurements in a mere 90 minutes.

Read more about technical and live data during sea trials of marine engines. 

Dealer-Level Servicing Through The Jaltest Marine Diagnostic Tool

Our Jaltest marine diagnostic software has a very intuitive and user-friendly dashboard that guides you through every step of fault clearance actions. It displays all the technical and maintenance data live once you connect to the engine’s onboard computer. This data can be used to identify the source of a problem.

Directly on the diagnostic menu, you can select a specific parameter or several of them to work on, ranging from engine, electronic module, instrument cluster, powertrain, steering, and more. Each parameter can either be selected individually for verification or all of them can be scanned simultaneously by selecting the relevant option.

Additionally, with the Jaltest boat motor diagnostic tool, you get all technical and live maintenance data that helps you to rectify faults and carry out servicing that is no less than what is offered by dealers of the engines. You therefore do not have to wait for service engineers to arrive for servicing, your problems are solved on the premises through prompts from our maintenance tool.

What helps a great deal is the wiring diagrams that are built into the software of every system and component. It assists you to identify precisely the point of the fault or a component that requires repairs and replacement. Hence, you can carry out several functions with our software that include but are not limited to working on the helm control unit, carrying out compression checks, setting up collaboration helm, and checking ignition coils.

Apart from the Jaltest marine outboard diagnostic tool, check out our inboard motor diagnostic software too. It has steering diagnostic functions as well as calibration of control levers and parameter settings. Further, you can modify the injector code in the ECM when an injector is replaced or installed. 

Summing Up

The Jaltest marine diagnostic tool is optimized for several functions that guarantees that your marine vessel is performing at peak efficiency. For instance, if you go to system technical data in the diagnostic menu, you can check multiple parameters of your marine engine. Under cylinder cut-out, you get to check injectors and ignition coils, idle speed, acceleration sensors, oxygen probe, and do compression tests.

Each item is fine-tuned to enhance the working of your marine engine. However, what sets the Jaltest marine diagnostic software ahead of the competitors is the ease with which our software can be set up and configured, unlike others in this field. Simply plug in our marine diagnostic computer to the marine engine and you are ready to read and clear fault codes.

We also provide three updates to our software every year. This helps you to keep abreast of any technological innovations in marine engines and stops our diagnostic software from becoming obsolete.     

Before going into the intricacies of the Jaltest Tractor diagnostic tool and its functioning, let us first understand what a typical tractor scan tool is.

For anyone in the agriculture or construction business, a tractor that is out of action is wasting money for every minute of downtime. Any malfunction has to be immediately diagnosed and rectified to get the tractor back on the job at the earliest. In traditional scenarios, it involved an elaborate process of calling service engineers who would diagnose the issue and carry out the required fixes. This would take days at conservative estimates.

All that has changed now with the advent of onboard computers and tractor diagnostic scanners. All modern equipment and vehicles including tractors are today armed with an onboard computer with the display unit usually tucked away below the dashboard on the driver’s side.

When any issue with the tractor arises a fault code in alpha-numeric format flashes on the display screen, indicating what the problem is. Now, instead of the service engineers, the Jaltest tractor diagnostics tool comes into the picture. Simply connect your software laptop to the onboard computer and you get details and interpretations of the fault codes, what the issue is all about, and the rectification action to be taken.

You therefore save a lot of money and time when you use the tractor diagnostic tool. You do not have to spend on paying for service engineers as the fault clearance is done on your premises only. Further, you save time and can quickly get your tractor back where it is needed the most, the farms or construction projects. 

The Scope and Function Of The Jaltest Tractor Scan Tool

The Jaltest tractor diagnostics tool kit is a comprehensive and user-friendly software that is essential on farms and construction projects to read fault codes. Any type of equipment including tractors with electronic systems can be fixed using our tractor diagnostic software.

How to make repairs and fix problems are built into the software using the procedures set by the original equipment manufacturer. While looking for solutions, you have troubleshooting options, regardless of whether it is a simple matter like a loose wire or a more complex issue such as performing forced regens.

While the Jaltest tractor diagnostics scans various makes of tractors, it also seamlessly connects to other types of agricultural equipment such as harvesters, combines, balers, swathers, sprayers, and more. This tractor diagnostic software covers almost 120 different agricultural equipment brands including John Deere, Case IH, New Holland, Kubota, Challenger, Volvo, Caterpillar, and others.

Our Jaltest tractor diagnostic tool is not merely a fault code reader but also carries out advanced diagnostic possibilities. Use the diagnostic menu to navigate various functionalities such as bi-directional controls, code injectors, DPF regens, transmission calibration, rear lift & spool valves, and more. Not only that, you get live technical and maintenance information in a step-by-step guide format that will help you to rectify issues before any issue becomes a full-blown problem.

What is also special is that you get complete wiring diagrams to accurately pinpoint the source of the malfunction in the system. This greatly helps to clear the fault either through the system or by repair and replacement of components. With our tractor diagnostic software, you are always in control of your tractors to get the most out of them.

A cutting-edge benefit of the tractor scan tool is that it is versatile and provides diagnostics across multiple brands on the full range of agricultural and other equipment such as cranes, diggers, and of course tractors.

With wide-ranging technical innovations being implemented in tractors and other AGVs and the introduction of the latest engines with onboard computers, there has been in the near past, a rise in demand for software that can quickly diagnose faults and have them cleared. This space has been more than adequately filled by the Jaltest tractor diagnostic maintenance software.

Let us now analyze some of the benefits that the Jaltest tractor scan tool brings to the table.

ü Component Actuation: Interaction and actuation of various systems that include cylinder cutouts, fan activation, compression test, and checking of various mechanisms.

ü Intuitive and user-friendly tool: You get all the information on connectors as the tractor diagnostic software guides you on which connector to use and the OBD socket location in the vehicle.

ü Diagnosis and clearing fault codes: Finding, interpreting, diagnosing, and rectifying all errors that are registered on the Electronic Control Unit of the tractor.

ü Measuring values: The Jaltest tractor diagnostic tool has the capability to measure and display up to 8 values simultaneously. This helps to clear faults on a wide scale. 

ü Calibrating and setting parameters: You can use the Jaltest to calibrate and set parameters of different functions and systems of your tractor that will be better suited to the work being done over factory settings. Access to calibration and parameter setting can be strictly controlled through passwords. 

These are some of the functions and scope of the Jaltest tractor diagnostic scanner.  

Read more about clearing tractor fault codes.

Full System Scans Vs. Scans By Symptoms

Jaltest tractor diagnostics offers several options for tractor maintenance. Typically, owners prefer to have a periodical routine for full system scans that include all key components and systems such as the engines, transmissions, brakes, hitch, and more.

In this activity, all systems are scanned for any malfunction or temporary fault codes that might be minor but have the possibility of becoming full-blown problems if left unattended.

Generally, the fault codes that crop up in routine full system scans are temporary and go away within a few driving cycles. However, care must be taken when this preventive maintenance is not enough, and more in-depth action needs to be taken. This is where you must initiate scans by symptoms for more permanent fault codes.

In this case, the tractor diagnostic will guide you on the particulars of the fault codes and the action to be taken, specific to that symptom only. This covers all components and symptoms and your tractor will soon be back on the job again.

It is always advisable to carry out full system fault prevention and identification scans at regular intervals so that no minor fault not generally detected in driving cycles remains unresolved for long. 

Force Regens With The Jaltest Tractor Diagnostic Tool

A very critical and important activity that is performed with the tractor scan tool is force regens, specifically for diesel-powered tractors only. All diesel engines that have a stop-go-stop routine tend to accumulate soot in the diesel particulate filters. When passive regens are unable to control the accumulation, the tractor engine will seize up and the machine will go into limp mode.

It is here that the tractor diagnostic software performs forced regens to clear the accumulated soot in the diesel particulate filter. The process is as follows. The engine is switched on and runs for around 40 minutes at a rev that is automatically calculated by the Jaltest scan tool. At this rev, the temperature of the emission gasses rises sufficiently to burn the accumulated soot off.

This phenomenon is typically not seen in diesel engines that run constantly over long distances.  

Examples of Tractor Fault Codes

Here are some tractor fault codes specific to New Holland and Case IH tractors. Please note that these fault codes are not standardized across makes and models of tractors.

Engine

ü 111         Engine Controller Failure - Hardware Failure

ü 115         Engine Speed Sensor (8.3, 9 Liter) or Cam Sensor (15 Liter) is failed

ü 121         Engine Position Sensor (8.3, 9 Liter) or Crankshaft Sensor (15 Liter) is failed

ü 122         Boost Pressure Sensor voltage is too high

ü 123         Boost Pressure Sensor voltage is too low

Transmission

ü 11           Master Clutch Potentiometer Open Circuit or short to ground

ü 12           Master Clutch Potentiometer Short to +12 Volts or short to 5 Vreff

ü 24           None of the transmission clutches are calibrated

ü 37           BOC switch open circuit or Neutral relay stuck open

ü 38           Shuttled to reverse when no wheel speed signal was available

Arm

ü 19           Hand THROTTLE potentiometer is failed

ü 29           Aux 1st remote valve LEVER potentiometer is failed

ü 39           Aux 2nd remote valve LEVER potentiometer is failed

ü 49           Aux 3rd remote valve LEVER potentiometer is failed

ü 59           Aux 4th remote valve LEVER potentiometer is failed

Hitch     

ü 1002       Raise the hitch valve coil short to 12 volts or raise the hitch valve coil circuit failure.

ü 1003       Open or Short to Ground raise hitch valve coil circuit failure.

ü 1004       Lower hitch valve coil short to 12 volts or lower hitch valve coil circuit failure.

ü 1005       Open or short to ground lower hitch valve coils.

ü 1006       EDC Low Side Driver stuck on failure.

Once the Jaltest tool displays a fault code when connected to the tractor OBD scanner, it will also guide you on what action to take to clear it.

Summing Up

The Jaltest tractor diagnostic tool is software that provides detailed explanations of the fault codes so that you can effortlessly clear them. At your disposal will be live technical and maintenance data in real-time as well as wiring diagrams that assist in pinpointing the location of the fault. You can carry out preventive routines too to ensure that your tractors are always on the job.

Additionally, the Jaltest software is very intuitive and user-friendly. Unlike others in this niche, users do not have to go through elaborate configuration and setup procedures. Simply download the software onto a laptop, plug into the tractor OBD scanner and you are good to start your maintenance work.

Finally, we offer three updates to our software every year. This is to keep up with constant technological innovations in tractors and to ensure that the Jaltest tractor diagnostic tool never becomes obsolete.     

Volvo is a name to reckon with in the transportation and construction equipment field. From trucks and busses to construction equipment that includes motor graders, wheel loaders, and excavators, to marine and industrial engines, Volvo has it all. If you have a fleet of them, you will require the Jaltest Volvo diagnostic software to keep them in peak performance mode.

In this post, we will go through the intricacies and functioning of the Volvo scan tool and how to use this very optimized maintenance tool. We will also largely focus on Volvo construction equipment as including all Volvo products will make the article a bit cumbersome.

Volvo Construction Equipment and the Volvo Diagnostic Scan Tool

When it comes to construction equipment, Volvi is the leader in this pack, offering world-class solutions. Apart from the company’s focus on sustainable products, their products deliver highly optimized power and performance. Most importantly, Volvo has a wide range of service stations across the globe and hence your equipment will never be stranded on downtime.

However, when you have a fleet of Volvo construction equipment and use the Jaltest Volvo construction equipment diagnostic software, you can easily check for any faults and rectify them before they become a major problem. This will keep your Volvo equipment always on the job and avoid prolonged malfunctions or breakdowns.

The main advantage is that by using the Jaltest Volvo diagnostic software, you are always one step ahead on the health of your Volvo construction equipment.

The Functioning of The Volvo Diagnostic Scanner

In this section, we will examine the functioning of the Volvo scan tool.

Every modern vehicle or construction equipment come with a fault self-diagnosis system via an onboard computer. Whenever a malfunction occurs in the equipment that affects the running status of the machinery, a fault code warning message will flash on the display screen located below the dashboard on the driver’s side. This is where the Jaltest Volvo diagnostic software comes into the picture.

On a fault code warning, you need to connect this maintenance tool to the onboard computer and check where the fault lies. Once this is done, and our software laptop identifies the issue, it will guide you through the rectification solutions so that the fault is cleared and your equipment is back on the job.

For example, suppose the fault code is P206A02 typical of a Volvo L60H loader. Our Volvo diagnostic tool will inform you that it is an issue with the aftertreatment fuel pressure sensor. This sensor is part of the emissions control system and monitors the fuel pressure after it has passed through the aftertreatment system.

The software will then handhold you through getting the rectification done on the premises without having to fall back on visits to the service center. All performance metrics are available on the laptop screen of the Volvo diagnostic software staring from fault rectification solutions to guides on how to change components if needed. 

There are two ways to get the maximum out of your Volvo construction equipment diagnostic software and our intuitive and user-friendly dashboard will show you how.

In the first instance, you can carry out what can be termed preventive maintenance to ensure that the equipment does not go to the fault warning stage. Here, Jaltest software helps you carry out periodical full system scans to make sure that all systems and components are working as they should. Any minor fault is therefore identified at this stage and rectified before they become a full-blown issue.

These cases are generally temporary Diagnostic Trouble Codes (DTCs) and are resolved over a few driving cycles or slight tweaking from the Volvo scan tool.

The other instance is scanning by symptoms. Once an error in the system is noticed by our software, it goes into rectification mode and what to do to clear the fault code. What helps is that your work is helped by live technical and maintenance data as well as wiring diagrams that show where the fault lies precisely and if any component in the software needs to be changed.

Hence, the Jaltest Volvo diagnostic software not only sets right and clears fault codes but also keeps your equipment in top performance condition through preventive maintenance.

Troubleshooting Faults With The Volvo Tech Tool Diagnostic Software

The Volvo Premium Tech Tool (PTT) is a diagnostic application designed for testing, calibrating, and programming engine parameters. The advantage here is that it makes diagnostics of engine faults fast and accurate, thereby making for equally quick resolutions.

Now let us get into how to resolve issues with your Volvo construction equipment with the Jaltest Volvo diagnostic software. The basic process is the same for all Volvo construction equipment though the fault codes and what they represent varies between different types of equipment.

• First, ensure that the Volvo scan tool is plugged into the onboard computer of your Volvo construction equipment and turn the ignition on. You do not have to run the engine. Our tool will now show the type of malfunction of your equipment.
• Go to the main menu on the Jaltest software and give the “Clear Codes” option from the main menu.
• At this stage, the Volvo diagnostic scanner will start checking any issues and initiate rectification procedures. You will receive guidance during the whole process with technical and maintenance data in real-time as well as through wiring diagrams. Some special instructions might also be issued by the software which you must follow. When asked by the Volvo diagnostic tool whether you want to clear the fault codes, tap “yes.”
• At this juncture, you will be handheld through a series of rectification actions and a wide range of prompts to arrive at the right solution. You will also be asked to turn the engine on and off. You will now receive either a “Success” or a fault not cleared message in which case other actions must be explored.  

In most cases though, this is enough to set your construction equipment right without calling in certified engineers.  

Read more about the Volvo construction equipment fault code.

Force Regens and The Volvo Diagnostic Scan Tool

Apart from a few materials handling equipment like tractors and a few construction equipment, almost all Volvo heavy-duty products are powered by diesel engines. It is here that force regens come up.

Our Volvo diagnostic scanner carries out a wide range of activities ranging from simple ones such as tracing a loose wire to more complex ones such as force regens. It is common for soot to buildup in the diesel particulate filter of diesel-powered vehicles.

Generally, passive regens can clear this accumulation but when the condition becomes severe, the engine will seize up and your Volvo construction equipment will go into limp mode. This will lead to downtime and affect your project adversely.

When you connect your Volvo diagnostic software to the onboard computer and a fault code related to engine issues shows up, our tool will diagnose whether it is related to soot accumulation in the DPF. It will then start rectification solutions based on the severity of the issue ranging from High to Very High.

Generally, clearing faults that require force regens need the engine to be run continuously for 40 minutes at a rev that will be decided by the software. The increased temperature of the exhaust gasses burns away the soot in the DPF. Our software will come in very handy in construction equipment as this problem is typically faced by vehicles and equipment that function in a stop-go-stop manner and not run long distances at a time.

Comprehensive Information With The Volvo Diagnostic Scanner

The Jaltest Volvo diagnostic tool offers a whole lot of detailed information that assists you in undertaking multiple corrective actions regardless of the type and model of construction equipment and engine.

An example of using the Volvo tech tool diagnostic software offers an insight of the working of the Jaltest software.

Suppose there is a fault code identification of a six-cylinder Volvo engine that requires a resolution. From the software, you get an easy-to-understand flow chart of various components such as the AHI, Hydrocarbon Metering Valve, Fuel Pressure Sensor, and Electronic Control Unit Supply Voltage. You also get several technical and maintenance data in our scan tool that includes Engine Load and Engine Speed during troubleshooting.

With all these metrics and parameters at your fingertips fault code resolutions with the Volvo scan tool is as easy as it can get.

Summing Up

Get all the critical information that is required from the Volvo diagnostic scanner to keep your equipment in peak operating efficiency. What helps is that detailed wiring diagrams and the required service instructions are in-built in the software along with several critical key parameters such as instrument cluster, telematic module, exhaust gas treatment systems, engine gateway, electronic diesel control, and more.

Before diving into the various aspects of the Case IH diagnostic software, a brief overview of the company and its products will help readers better understand Case equipment diagnostic software when we come to it. This will also explain more lucidly, the functions of the Case IH diagnostic tool and how it resolves issues with any Case IH equipment.

Case IH is an American company with its primary business being the manufacture of agricultural machinery. The company was founded in 1985 and later merged into J.I. Case Company. Currently, the owner of Case IH is the American-Italian corporation CNH International.

Case IH has a wide network of dealers and distributors throughout North America. Even though the manufacture of agricultural equipment forms the backbone of the company’s business, it also provides customer support to farmers and commercial operators through the sale of spares and dealer-level servicing. Case IH produces combines and harvesters, tractors, hay, and forage equipment, planting and seeding systems, and sprayers and applicators.

Their product range proves that when it comes to agriculture and farming equipment, there are few companies that can beat it in this regard. Their quality of equipment is outstanding and this has led to Case IH receiving awards galore, especially AE50 awards from the American Society of Agricultural and Biological Engineers.

This post will go into the various aspects of the Jaltest Case diagnostic software and how you can use it to ensure that your equipment is always on the job without any downtime.  

Case IH Scan Tool – Keeping Your Equipment in Peak Performing Condition       

Using the Jaltest Case IH scan tool ensures that your Case IH equipment is always performing as it should and that any minor issue is quickly solved before becoming a major one. The tool covers all systems and components of your Case agriculture equipment including engines, hydraulics, transmissions, central computers, and more.

All functions are effortlessly tracked and monitored by the Jaltest Case IH diagnostic software, from simple ones like fixing a loose wire to complex ones such as force regens, calibrations, and setting parameters. What gives the Case equipment diagnostic software an edge over other maintenance tools in this niche is that ours caters to almost all models of Case IH agriculture equipment.

Our Case IH diagnostic tool case is good for Case IH Series Steiger, Magnum, Maxxum, Puma models, and more. Among Case IH tractors covered are Steiger 620 and Magnum 420 and Case IH Axial Flow 9250 and 7150 for combines. You cannot get a better Case IH diagnostic software to handle fault codes of your Case IH equipment than the Jaltest tool.

Before going further, an understanding of fault codes is necessary to know how the Jaltest Case IH diagnostic software functions.

All modern vehicles and equipment today have an onboard computer with a display where you can see certain alpha-numeric figures flashing whenever a malfunction occurs. These codes correspond to specific faults with the equipment. When you connect our software laptop to the Case IH diagnostic plug of the onboard computer, you are shown what the fault is and what corrective measures to take to get the equipment back on the job as soon as possible.

Our cutting-edge and technologically advanced Case IH diagnostic software is a comprehensive maintenance tool where you can read various fault codes. These include Case IH engine fault codes, Case IH combine fault codes, Case IH tractor fault codes, Case Puma fault codes, and more.  

Based on these fault codes you can carry out a whole lot of system and component checks with the Jaltest Case IH scan tool. Among the major tests enabled by our maintenance tool are cylinders test, high-pressure test, checks for the engine, brake, Variable Geometry Turbocharger (VGT), and throttle valve electric actuator for the exhaust, engine, brake, and more.

These checks make sure that your Case IH agriculture equipment is always on the job without downtime, especially during the peak harvesting seasons.      

Preventive vs. Maintenance Options With The Case IH Diagnostic Software

The Jaltest Case equipment diagnostic software offers you two options to keep your equipment always in working condition without downtime. One is preventive scans where any minor issue is detected at the root and quickly solved before it can become a full-blown problem. The other is the maintenance action where cans are done by specific systems of malfunction and action is taken as per the fault.

Preventive scans or periodical full system scans are very necessary to keep your equipment always running without downtime. When you can identify minor faults that are temporary and will go away after a few driving cycles in advance, you can focus on those areas in the future and thwart the possibility of them coming back time and again. Further, it is a big relief to also know that there is nothing wrong with your equipment through full system scans.

The other part of the Case equipment diagnostic software is the maintenance option where scans are carried out by specific symptoms and resolutions initiated to rectify the faults. Our software will handhold you through cutting-edge solutions that will get your equipment running again at the earliest. What helps is that you get live maintenance and technical data as well as detailed wiring diagrams to know the precise location of the fault.

Force Regens

One of the most critical activities that is carried out with the Case IH diagnostic software is forced regen which is a part of the Case IH engine fault code and is specific to diesel engines only.

Forced regen is necessary when soot builds up in the diesel particulate filter, leading to the engine seizing up and the equipment going into limp mode in extreme cases. This action is required when passive regens cannot clear the soot accumulation in the DPF. When this happens, the health of the engine will be reflected as a fault code in our software which will then prompt you to take the required action, ranging from High to Very High to clear the soot.

Forced regens can be carried out on all models of Case IH agriculture equipment such as the Case Steiger, Case Magnum 420, Case IH axial flow 9250/7150, Case Puma, and more. This fault typically occurs when any vehicle or equipment operates on a stop-go-stop mode as in agriculture equipment instead of continuously running as in long-distance busses.

Forced regens is done by running the engine for around 40 minutes at a specific rev which will be guided by our Case IH scan tool. This raises the temperature of the exhaust gasses and the soot buildup is burned away. Even though it is a complex process and requires following several metrics, Jaltest diagnostic software handles the process with great ease.

Read more about the necessity for Forced Regens.

Samples of Fault Codes From the Jaltest Case IH Diagnostic Software

Till now, several mentions have been made of fault codes and how to handle them. Now, let us now check what fault codes represent when they pop up on the Case IH diagnostic software laptop. The complete list and their interpretation are given in the Jaltest software.

However, these fault codes are not standardized and differ between models and types of equipment. Given here are some samples of the Case IH tractor Magnum 235-340 series.           

• 111 Cab sensor open or shorted to power
• 112 Cab sensor shorted to ground
• 113 Outlet sensor open or shorted to power
• 114 Outlet sensor shorted to ground
• 115 Evaporator sensor open or shorted to power

For the Hitch

• 1002 Raise the hitch valve coil short to 12 volts or raise the hitch valve coil circuit failure.
• 1003 Open or Short to Ground raise hitch valve coil circuit failure.
• 1004 Lower hitch valve coil short to 12 volts or lower hitch valve coil circuit failure.  
• 1005 Open or short to ground lower hitch valve coils
• 1006 EDC Low Side Driver stuck on failure. 

For The Transmission

• 2009 Seat switch open circuit
• 2010 Seat switch is shorted to the supply voltage B+ or 5-volt reference  
• 2011 Clutch Pot Open Circuit or short-to-ground
• 2012 Clutch Potentiometer Short to +12 Volts or short to 5 Volt reference.
• 2024 None of the Transmission clutches are calibrated. This will be the condition when a new controller is installed on the tractor.   

For The Engine

• 3001 Foot Throttle Sensor ‐Signal Not Plausible
• 3002 Foot Throttle Sensor ‐Signal Above Range Max.  
• 3003 Foot Throttle Sensor ‐Signal Below Range Min.  
• 3004 Foot Throttle Sensor ‐No Signal ‐Error  
• 3006 Coolant Temperature Sensor ‐Signal Not Plausible (Compared with Engine Oil Temperature)

The fault codes given here are just samples of one make and model of Case IH tractor only and there are hundreds of others too. All fault codes are reflected in the Case IH diagnostic software that will guide you through the several processes for implementing fault resolution actions.

Summing Up

The Jaltest Case equipment diagnostic software is an optimized tool that handholds you through any malfunction that might arise with your agriculture equipment. You get the assistance of live technical and maintenance data in real-time from the software when you connect to the onboard computer.

What makes our software stand out from others in this niche is the simplicity of setting up the maintenance tool on your laptop. Unlike others, there are no elaborate configuration procedures to go through, simply plug in and the tool is ready to churn out solutions for your Case IH agriculture equipment.